JW4108S FTTH Fiber Optic Splicing Machine Optical Fiber Fusion Splicer. JW4108S Optical Fiber Fusion Splicer with high performance price ratio, smart appearance, reliable quality. Optical Fiber Fusion Splicer is also called Cable Splicing Machine.It is mainly applied to. The construction, maintenance, emergency repair and emergency repair of the optical cable lines of telecom operators, communication engineering companies and public institutions; and the experiment, production and testing of optical devices; scientific research and so on. Fusion splicer is designed to splice many types of fiber by using core diameter aiming rationale, its shape is compact, light weight, which is suitable for field work. Operation is simple, fusion speed is high, and fusion loss is small. In power modules: Fusion Splicer uses 3 in 1 power module design, during the work, the Fusion Splicer can be supplied by the polymer lithium ion battery separately; or use AC adapter for electricity supply; when adapter is used for electricity supply, the polymer lithium ion battery is charged at the same time. The lithium battery to be changed must be the model specified by the Company. Verify that the machine is plugged in power or the battery capacity is enough; then press and hold the key until the machine is booted. In the standby mode, press to enter Splice Menu menu.
Move the cursor to [Operation Options]; press to enter. Set [Auto Start] [pause 1], [pause 2] respectively as ON, OFF, OFF. Discharge calibration is needed because constant changing of atmospheric conditions such as temperature and pressure, and the long service of the machine creates variability in the arc temperature and position.
In the [Ready] mode, press to enter Splice Menu menu. Then prepare and place fiber according to the method described in fiber preparation. Press to enter [Arc Calibration].
The user is recommended to repeatedly prepare and place fiber in discharge calibration interface, until the Step II of discharge calibration completed message is displayed for three times. Note: Discharge calibration is needed only arc power fluctuates strongly, it is not necessary upon boot every time. After discharge calibration is completed, the machine will adjust the arc discharge current according to the calibration results to ensure fusion quality. Put the tube over one end of the fiber. Use fiber stripping pliers to strip fiber coating layer, the length of which is 30-40 mm.Use gauze dipping with alcohol or wadding to wrap the fiber, and then clean the bare part. Use a fiber cleaver to cut the fiberBare fiber length is 16 mm around.
Put the finished fiber in the Fusion Splicer. Cross-section of fiber can not touch other things. Cover the wind protector, then the fiber fusion automatically starts and the splicing loss is displayed. Transfer fiber with protection sleeve from V-grooves to tube heater. Make sure the splice point is located at the center of the protection sleeve.
Put the tube at the center of the heater. The buzzer beeps and the HEAT LED. Turn off when tube heating is completed.Remove the tube from the heater when the heater is cool. The whole process of Fusion Operation is completed. Repeat Step 2, 3, 4 to continue splicing. The input voltage of this model of machine is definite; please do not use the voltage outside the scope. Please use the correct AC and DC power supply. When the fusion splicer comes across the following failures, please immediately remove the AC power cord from the power supply input and turn off the fusion splicer, otherwise will lead to the incapable of the repairing and even will cause personal injury, death and fire. This model of fusion splicer does not have the need to maintain internal components, dismantling of fusion splicer and power modules is prohibited; any mistake in maintenance will lead to the machine beyond repair even causing bodily harm. The machine has strictly limitation to the power supply module used.
The fusion splicer is prohibited to be used under the environment with the inflammable liquid or flammable gas; otherwise will lead to fire, explosion and other serious consequences. FTTH applicable to the environment, can also be used for ordinary optical fiber engineering. The PAS core to ensure accurate alignment, low connecting loss. 8 seconds - 30 seconds of welding, heat shrinkable.The X/Y axis X/Y axis or a separate display shows at the same time, 300/200 times magnification. 5 - inch digital high-definition LCD screen, while observing the X axis and Y axis direction of the optical fiber. Three in one fixture, welding core, flex, pigtail. The built-in high-capacity lithium battery, can be completed 200 times and continuous heating. The small size and light weight, only 2.5kg with battery. Splicing Type: SM, MM, DS, NZDS. Splicing Loss: 0.02dB(SM), 0.01dB(MM), 0.04dB(DS). Splicing Mode: Manual, Half Auto, Auto. Applicable Fiber Cable: Indoor And 0.25mm, 0.9mm Fiber, SC Connector (Option). Fiber Image/ Magnification: 300/200 Times. View Display: 5 Inch Digital High-Quality LCD Screen. Tension Test: Standard 2N (Option). Heat Shrinkable Sleeve: 60mm, 40mm And Serials Heat Shrinkable Sleeve. Battery Capacity: 200 Cycles Splicing And Heating, 3 Hours Charging Time. (Splicing And Charging At Same Time). Battery Life: Cycling Charge 300-500 Times, Easy To Replace Battery. Electrodes Life: 3000, Easy To Replace Electrodes. Interface: USB Convenient Data Download And Software Update.
Construction Lighting: Built In High Brightness, Wide Range Of Lights, Easy To Operate At Night. Power Supply: Built In Lithium Battery 5200mAh 11.1V; External Adapter, Input: AC100-240V, Output: DC13.5V/4.5A. Operating Condition: 0-5000m Above Sea Level. Weight (Including Battery): 2.5 KG (Including Battery). Dimension (LxWxH): 165mm × 155mm × 150mm.As a leading and emerging company in manufactory and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
All emails will be responded to within. You want to cancel an order. If you need further assembly instructions for a product. Any other unspecified questions or concerns. Special circumstances will be listed clearly in the listing.
Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. A: The item ships from Rancho Cucamonga, CA, United States. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item.
The item "Mobile Remote control Automatic Fusion Splicer FTTH Fiber Optic Splicing Machine" is in sale since Tuesday, September 4, 2018. This item is in the category "Business & Industrial\Electrical Equipment & Supplies\Electrical Tools\Fusion Splicers & Cleavers". The seller is "bigvaluehotitem" and is located in Ontario, California.This item can be shipped to United States, Canada, Mexico.