V4 520mm Nylon Rack (QTY: 10). 10m 4 Core Non Shielded Cable (QTY: 2). APC Slimline Vandal Resistant Keypad with EM card Reader (QTY: 1). Em Swipe Tag (QTY: 2). APC Wired Double Push Button Switch with Key Issolation (QTY: 1).
5m 4 Core Non Shielded Cable (QTY: 1). 12V AC 10A Remote Transformer (QTY: 1). Heavy Duty Italian Sliding Gate Motor Overview (APC Proteous 400 24V Sliding Gate Motor APC-P400). Front Side (APC Proteous 400 24V Sliding Gate Motor APC-P400). Solid Alloy Housing Simple to setup spring limit system STEEL Pinnion Gear All installation connections are low voltage Automatic Setup Feature to learn the Ramp Up and Slow Down points of the gates Adjustable slow speed from 30% to 60% of the speed Ultra High Security Rolling Code remote system allows for the highest form of security for entry to your property Adjustable Automatic Close time up to 2 minutes Pedestrian Function allows for partial movment of the gate, this can be toggled by remote, keypad or push button.
Adjustable Over current adjustments Built in Encoder Safety Sensor connection input Automatic Courtesy Light Output. Accessories Compatibility and Controlling Options (APC Proteous 400 24V Sliding Gate Motor APC-P400). Constant 24V DC Accessories Output Open/Stop/Close Inputs for Full Gate Operation and Pedestrian Gate Operation Remote controls Entry and Exit push button with isolation key switches (Wired and Wireless Options Available) Keypads (Wired and Wireless Options Available) Exit/entry sensors Intercom system with dry contact output Automatic switching timer WiFi Control System (App Based Control) GSM Control Systems (Mobile Call/SMS based Control). Specifications (APC Proteous 400 24V Sliding Gate Motor APC-P400).
APC Rolling code 433.92mhz. Dimensions (APC Proteous 400 24V Sliding Gate Motor APC-P400). External Transformer (Extendable up to 80 metres cable distance).24V External weatherproof designed to be used in a low voltage cabling application of up to 80 meters, supplied with a pre-connected 20 meter cable this is a perfect solution when running mains power to the gate is not a viable option due to costs, difficulty or just simply to DIY. An optional battery backup system is available for the automation kit. The back up battery system will allow for continued use of the gate system and will automatically recharge upon power restoration. Whilst the system is powered it will continue to float charge to keep the batteries topped up ready for use. The systems is supplied with the inline charger along with 2x 1.3aH batteries and is neatley integrated into the battery shelf within the proteous system.
Battery compartment with batteries installed. APC-PE2000 Photoelectric Safety Sensor Set. The Safety sensor set is used to prevent the closing cycle occurring during the case of the sensor path being interrupted by vehicles, trailers or any other obstacles.
If the gate begins to close and the sensor path is interrupted then the gate will stop and return to the open position. Both sensors (transmitter and receiver) are wired back to the control box of the gate system using the supplied cable roll, alternatively a reflective sensor upgrade is available which will only require wiring from the sensor mounted at the control box. Up to 15 Metres Infared beam operating distance. Only powers on when the command is given to close the gates.
Alignment led to assist in the installation process. Weather sealed with the supplied cover seals. Easy screw down wiring termination. APC-KP1C Wired keypad with built in card reader. The APC-KP1C keypad is a waterproof low voltage keypad which is wired back to the control board using the supplied cable roll.It is of alloy construction and extremly robust. It can be seen day or night thanks to its backlit keys. Two EM swipe cards are also supplied suitable for any temporary or permanent user that need to gain access into the property without a pin code. Built in EM card reader.
Resin filled for ultimate weatherproofing. IP66 Waterproof rated and suited for outdoor and indoor environments. Up to 1000 users for pin code and EM card. Wired Double Push Button with Isolation Key. The wired double push button switch is a simple and easy to use method to operate the gate for full gate operation and also pedestrian function.
It is mounted in the general area of the gate and can be isolated by using the supplied keys without affecting the rest of the system, this is handy if you want to continue using the remotes or any other method of operation but wish to stop use of the push button itself. The push button is wired to the control board using the supplied cable roll. If required the button can be upgraded to a wired keypad for higher access security using pin number for either the full gate operation or pedestrian function. Optional Universal Flashing light with Built In Antenna. Multiple options for operating voltage from 12V - 265V in AC or DC.Ultra Low Consumption of less than 3W. Two operating modes available: Flashing illumination (1HZ) or Solid Illumination.
Bright Orange Casing for Great Day and Night time visibility. Built in booster antenna connection. Simple wiring using two core for the light and RG58/59 for antenna. Optional Automatic Gate Caution Sign. Lightweight plastic caution sign to warn pedestrians and vehicles that there is an automatic gate in place.
Size is 290mm x 290mm. The item "Sliding Gate Opener, Made in Italy Electric Motor Automatic Remote Control Gate" is in sale since Tuesday, March 9, 2021. This item is in the category "Home & Garden\Building Materials & DIY\Garage Doors & Openers\Opener Systems". The seller is "automotionplus" and is located in Moorabbin. This item can be shipped worldwide.